All Products (Total 488 Products)
Unit Price: 2.7~2.9USD
Min. Order: 50 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
Circlip pliers are tools used to grip and remove circlips. A circlip is a spring gripper used to connect and secure parts and is commonly used in mechanical and electronic equipment. Circlip pliers typically consist of two movable gripping arms with hooks or claws on the arms for gripping and removing the circlips....
Unit Price: 8.2~8.5USD
Min. Order: 50 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
The oil-gas multi-purpose nozzle is a tool that can be used for refueling and inflating cars. It usually includes a gas port and an air nozzle that can be used at a gas station or home. When in use, the user can select a gas filler or air nozzle and insert it into the car's fuel tank or tires. This tool can easily...
Unit Price: ~175USD
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
status: New
When the lifting gun is refueled, the motor rotates slowly and heats up
1. Caused by motor damage, the internal coil of the three-phase motor is broken all the way and the starting capacitor of the single-phase motor is damaged, which will cause the load capacity of the motor to be reduced, and the motor rotates...
Unit Price: 192~195USD
Min. Order: 2 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
There will be gas in the fuel fluid filled by the dispenser
1. Check the exhaust condition of the oil and gas separator, if the exhaust does not stop, it means that the oil pipeline is seriously leaking, and the pipeline and bottom valve should be repaired;
2. The exhaust pipe of the oil and gas separator sucks...
Unit Price: 2.3~2.5USD
Min. Order: 50 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
Fuel dispenser solenoid valve failure: When the machine does not produce oil because the solenoid valve of the fuel dispenser cannot be opened, first check the control circuit part of the solenoid valve, such as whether the lamp valve plate, relay board or motherboard is damaged, etc., whether the zero line is...
Unit Price: ~225USD
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
status: New
Fuel dispensers are born with the development of the automobile industry and transportation industry, and are an indispensable metering device for adding fuel to motor vehicles. Air leakage is generally a characteristic of self-priming pumps, and leakage points are generally generated at the oil inlet of the oil pump,...
Unit Price: 354~356USD
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
product type: Other
A fuel dispenser is a device used to fill fuels such as gasoline and diesel, and is usually installed at gas stations or other fuel supply points. It consists of tanks, pumps, metering equipment, valves and pipes, which can automatically calculate the amount and price of fuel to be filled. Fuel dispensers are also...
Unit Price: 5.2~5.5USD
Min. Order: 200 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
The pressure regulator can basically be said to be a pressure reducing valve, the working principle of the pressure reducing valve is as follows: the high-pressure medium is charged into a relatively large cavity through a small hole to achieve pressure reduction, in fact, by interception of the pressure reduction,...
Unit Price: 0.38~0.4USD
Min. Order: 2000 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
The dust blower is mainly used in the factory and the dust removal work during installation and maintenance, and is most suitable for cleaning work in some narrow, high places and trachea that cannot be touched by hands. The pneumatic blow gun uses the principle of air amplification to effectively reduce the...
Unit Price: 4.5~4.8USD
Min. Order: 300 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
Big head oil-water separator is a kind of equipment used to separate water and oil. It usually consists of an oil-water separator and an oil collection tank. When sewage enters the oil-water separator, they are separated into two parts: oil and water. The water is discharged down the drain and the oil is collected...
Unit Price: 4.5~4.8USD
Min. Order: 300 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
1. Check the refueling machine seals: The main reason for the leakage of the refueling machine is the aging or damage of the seals. Therefore, check whether the seals are intact and need to be replaced in time if damaged. 2. Check the valve of the oil dispenser: the valve of the fuel dispenser may leak, and it is...
Unit Price: 8.4~8.8USD
Min. Order: 300 Others
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support
Where to provide local services (in which countries are there overseas service outlets): None
Showroom location (in which countries are there sample rooms overseas): None
Fuel dispenser air leakage can be caused by the following reasons: 1. Poor sealing of the fuel dispenser: Poor sealing of the fuel dispenser may be caused by aging, damage, deformation and other reasons of the sealing ring, resulting in air leakage of the fuel dispenser. 2. Poor pipeline connection: Poor connection of...
Unit Price: 1.4~2USD
Min. Order: 10000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
product type: Other
This is used in the inner diameter of the bobbin cotton yarn cover 25-28 mm, if the bobbin deformation, you can use it to correct. We are specially designed for the round machine, plastic material, there are red and orange two, only the color of the different, generally red to sell more. We have three sizes of the...
Unit Price: 6.5~10USD
Min. Order: 1000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Online Support, Video Technical Support
status: New
Taiyangzhou synchronous pulley carrier pulley clutch pulley spandex frame punching pulley knitting machine accessories. Spandex synchronous wheel 30 teeth, outside diameter 5cm. The yarn carrier synchronous wheel has 27 teeth with an outer diameter of 4.6 cm. Feed Hole Pulley 14 points.
Unit Price: 298~366USD
Min. Order: 50 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
Yarn carrier MPF20-L1 round machine electronic yarn breakage yarn feeder yarn storage knitting machine accessories. Please contact us for more model specifications.
Unit Price: 1.5~2USD
Min. Order: 10000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Online Support, Video Technical Support
product type: Other
Our products are guaranteed to be brand new, hard, smooth and burr-free, to protect your machine operation. There are three sizes, this is a medium size, suitable for the inner diameter of 47-50mm of the bobbin, if your bobbin deformation, you can try this improvement. Please choose the right size according to the...
Unit Price: 1.4~2USD
Min. Order: 10000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
In the use of the yarn in the process, often deformation, distortion, resulting in yarn is very easy to break, machine frequent downtime, this time need to use this kind of lid. Jam it on the bobbin to smooth the yarn rotation and stop it from getting stuck frequently. This is a large flat head cover, generally used...
Unit Price: 35~50USD
Min. Order: 10000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
UPF20-B19 positive yarn feeder——The yarn is fed into the knitting area as required. The length of the yarn can be controlled or the tension of the yarn can be kept consistent through the conveyer so that the knitting fabric meets the production requirements, most of the yarn conveyors have the function of yarn...
Unit Price: 1.5~2.5USD
Min. Order: 1000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Online Support, Video Technical Support
status: New
Lamp Shade Sun Island yarn carrier spandex lamp cover yarn carrier lamp shell knitting big circle machine accessories. The red plastic lampshade on the yarn breaker. They are generally universal. If you need other accessories, please contact us.
Unit Price: 2~5USD
Min. Order: 1000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
Unit Price: 10~15USD
Min. Order: 1000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
This is the two-hole yarn feed assembly on the yarn feeder of circular machine. If your device is broken, you can only buy this device to replace it.
Unit Price: 5~10USD
Min. Order: 1000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
This is used in the circular jig assembly, the pink beading, if the jig assembly this broken, you can take this replacement. Please contact us for more information.
Unit Price: 0.15~2USD
Min. Order: 10000 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
This kind of Sinker plate is specially used on the circular machine, according to their own needs to choose different models, common circular machine models we have, details please consult US Oh! The price is the price of one piece.
Unit Price: 50~71USD
Min. Order: 5 Piece/Pieces
Applicable industry: Manufacturing Plant
Out-of-warranty service: Video Technical Support, Online Support
status: New
This kind of control panel is specially used on the circular machine, according to their own needs to choose different models, common circular machine models we have, details please consult us Oh!
