Electronic pressure gauge for fuel injector

  Fuel dispenser solenoid valve failure:
  When the machine does not produce oil because the solenoid valve of the fuel dispenser cannot be opened, first check the control circuit part of the solenoid valve, such as whether the lamp valve plate, relay board or motherboard is damaged, etc., whether the zero line is connected, and then check the fault of the solenoid valve itself, such as whether the coil in the valve is broken, whether the valve diaphragm hole is blocked and other internal failures;
  Line and foot valve failure:
  Check the exhaust condition of the exhaust pipe of the oil and gas separator in the start-up state, and if the exhaust does not stop, it can be preliminarily determined to be a leakage fault of the fuel pump pipeline or bottom valve.
  No oil output caused by oil gun failure:
(1) The oil gun filter screen or joint is blocked, and the oil gun filter screen and joint should be disassembled during maintenance, and the impurities can be reinstalled after removal;
(2) The oil gun frequently self-seals, resulting in the oil gun not producing oil. The self-sealing mechanism of the oil gun should be overhauled, such as whether the air intake nozzle is blocked.

In addition, we have other accessories such as Circular machine oiler, Control Panel, Adjustable Yarn Bobbin Cover, Synchronous Belt, Needle Cylinder and so on.

This is the hydraulic meter of the fuel dispenser, which is used on the Knitting Machine Oiler.If there is a problem with the hydraulic gauge of the tanker, like the Circular machine oiler, you can change this.